Discover the unique ACE SPE-system principle that saves you time and reduces how much cleaning agent you use, while making you more productive than ever.
The ACE SPE-system consists of three parts:
A top-quality air cap, the gun housing, and the replaceable ACE SPE-System nozzle insert.
| Material | |
|---|---|
| Protective cap | Polypropylene (PP) |
|
Nozzle insert Sealing plug |
Polypropylene (PP) |
| Weight | |
|---|---|
| Protective cap | 1,0 g |
| Nozzle insert | 7,5 g |
| Protective cap |
|---|
| This precision component is sealed by the stable cap for protection against external factors during transport. The cap is simply removed before use. |
| Injector size |
|---|
| To identify and distinguish the nozzle sizes, the respective size is indicated at the front above the nozzle. |
| Serial number |
|---|
| Every component is visually inspected and measured. A serial number for traceability is engraved on the nozzle insert using laser technology and the data is archived for warranty claims. |
The ACE SPE-system nozzle insert is a next-generation precision component.
With sizes from 1.2 mm to 2.5 mm, the system can be used for all painting & lacquering tasks and guarantees highly reproducible spraying results.
By changing the nozzle insert, you avoid cross-contamination when switching colors as well as spraying results of inferior quality and blockages caused by residues in the paint duct. Swapping out the insert therefore enables permanently excellent spraying performance equivalent to using a new gun.
| Coating systems | 1.2 | 1.3 | 1.4 | 1.6 | 1.8 | 2.0 | 2.5 |
|---|---|---|---|---|---|---|---|
| Paints and lacquers with a high viscosity | |||||||
| Spray filler | |||||||
| Thick film filler | |||||||
| Sanding filler | |||||||
| Wet-in-wet filler | |||||||
| Universal top-coat paint/lacquer | |||||||
| Solvent-based paints/lacquers | |||||||
| Clear paint/lacquer | |||||||
| Base coat | |||||||
| UV filler | |||||||
| Effect paints/lacquers | |||||||
| Smart/minor damage repairs |
The ACE SPE-system nozzle insert is a milestone in the modern painting industry. Its even spraying and consistent spray pattern paves the way for impressive results.
As a top-class solution for exacting requirements in painting technology, the ACE SPE-system offers the highest level of performance and reliability.
We take various protective steps to ensure that the nozzle insert reach their destination intact. This begins directly at the production facility, for example, where a protective cap is immediately put on once the serial number has been engraved.
The advanced design means that cleaning is fast and straightforward. Only the paint needle tip must be cleaned, without completely disassembling or soaking the lacquer gun. This allows you to optimize your workflows and saves you valuable time.
The fast cleaning not only increases the efficiency of your work but also makes it even more sustainable. Using less cleaning agent is better for the environment and also extends the service life of your premium paint spray gun.
The EcoGun ACE spray gun, manufactured by our partner Dürr, is available through its sales partner.
Contact HSM or the HSM regional representatives directly, who will be happy to help you find a suitable dealer in your area.
| Conventional/CF | ||
|---|---|---|
| Air consumption (depending on the air cap type and air pressure) |
[Nl/min] | 240 - 280 |
| Transmission rate | [%] | > 65 |
| LVLP/LF | ||
| Air consumption (depending on the air cap type and air pressure) |
[Nl/min] | 265 - 310 |
| Transmission rate | [%] | > 75 |
| Maximum | [bar] | 7,0 |
| Recommended | [bar] | 2,0 - 3,0 |
| Minimum | [°C] | 10 |